Home > High Voltage Disconnect Switch >

High Voltage Automatic Isolator Disconnect Switch GW1 24kv 12KV 11KV 10KV

Product Categories

Xi'an Xigao Electricenergy Group Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High Voltage Automatic Isolator Disconnect Switch GW1 24kv 12KV 11KV 10KV

Ask Lasest Price
Brand Name :	XG
Model Number :	GW1
Certification :	ISO,CCC
Payment Terms :	L/C, T/T, D/A, D/P, Western Union, MoneyGram
Supply Ability :	2000 SET
Delivery Time :	3-7 DAYS

Add to Cart

Product Details
Company Profile

High Voltage Automatic Isolator Disconnect Switch GW1 24kv 12KV 11KV 10KV

1.10kV 35kV outdoor high voltage Disconnector 3 phase isolatOR Switch GW1 600A 800A

GW1 series outdoor high voltage isolator switch are high voltage switchgears of monopole structures and be applied for the connection and disconnection of circuit under voltage without loading. kNife switch with CS mould manual operating mechanism can prevent disoperation such as switching in etc. On line earthing wires. And the operating staff needs not to clients for heavily polluted areas and can make effective solutions on the pollution flashover during the operation of disconnecting switches.

2.Technical parameter

N0.	Test Item	Unit	Data
1	Rated voltage	kV	24
2	Rated current	A	200/400/630
3	Rated frequency	Hz	50/60
4	Rated short-time withstand current	kA	25
5	Rated short-circuit duration	s	3
6	Rated active load breaking current	A	200/400/630
7	Rated loop breaking current	A	200/400/630
8	Rated cable charging current	A	12
9	5% rated active load breaking current	A	31.5
10	Rated short-circuit making current	kA	63
11	Main loop resistance	μΩ	≤100
12	power frequency withstand voltage against the earth, between phases	kV rms	50
13	power frequency withstand voltage against the isolating distance	kV rms	60
14	Lightning impulse withstand voltage against the earth, between phases (peak)	kV	125
15	Lightning impulse withstand voltage against the air gap(peak)	kV	145
16	Mechanical life	Times	10000
17	Three phase closing asynchronous	ms	≤5

3.Normal service conditions

1. The altitude shall not exceed 1000m.
2. Ambient air temperature: maximum+40 ℃; Minimum temperature: - 30 ℃, maximum temperature: - 40 ℃.
3. The wind pressure shall not exceed 700Pa. (corresponding to 34m/s wind speed).
4. The working environment shall not exceed 8 degrees.
5. The working environment shall be free from frequent and violent vibration.
6. The installation site of ordinary isolator shall be far away from gas, smoke chemical deposition, salt mist, dust and other explosive and corrosive substances that seriously affect insulation and conductivity, as well as seriously polluted conductive areas; However, it should not be any explosive substance or fire causing substance.

4. Technical drawings

5. FAQ

1. Send the technical data, better for all useful information; we will make a good recommendation.

If possible please attach one reference picture to avoid any misunderstanding or any links from our website for we get a better understanding.

2. The lead time depend on quantity of order. Some standard type is on stock. Otherwise, it will take 3-15 days.

3. Usually shipped by sea, small order or urgent order we can send you by air.

4. All our activities are accredited to ISO 14001:2015 and IEC standard.

5. Technology ensure the quality satisfy international request.

Product Tags:


*From:	Your email address is incorrect!
*To:	Xi'an Xigao Electricenergy Group Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!